Cover For Bike Desk Chair

Bike desk chair – Turn your office chair in a seat of inspiration for you to learn how to sew a cover for an office chair – in a few steps. Cover the back of the chair and the seat, or just make the back of it; with basic sewing skills, you can make a bike desk chair that will have all your employees feel jealous.

Posted on September 20, 2020 Modern Desks


Measure the height and width of your chair back; If the bike desk chair has a thickness of the back, divide it in half, and the width of the measurement as well. Add 1 inch to your height and width, and then cut two pieces of home furnishing fabrics to match these measurements. Open the bottom of each piece of fabric with a quarter inch to failure or the back pressure and, then again with a different one quarter inch, and press again. Use straight pins to hold the hem in place, and sew along the bottom edge with a straight stitch.

13 Photos Gallery of: Cover for Bike Desk Chair

Bike Desk Chair SmallSize: 1217 x 655

Bike Desk Chair SimpleSize: 900 x 900

Bike Desk Chair SetSize: 1100 x 1100

Bike Desk Chair ModernSize: 1067 x 1600

Bike Desk Chair ModelSize: 900 x 900

Bike Desk Chair MagnetSize: 1200 x 880

Bike Desk Chair MachineSize: 1000 x 1000

Bike Desk Chair ImageSize: 1920 x 1080

Bike Desk Chair DesignSize: 1004 x 1500

Bike Desk Chair BrownSize: 1280 x 720

RELATED :   Aviator Wing Desk

Place the two pieces of fabric together with the right sides together; lining the bottom edge you just hemmed. Sew a straight seam around the top and sides of the bits leaving the lower edge opened completely. Place the straight seam about a half inch from the edges of the fabric. Clip the corners of the fabric at the top, outside your sewing line, so you do not cut yourself seams. Turn the fabric pocket, you just made the right side out and slide down the back of your bike desk chair.